Fosber America, Inc. - Cut-off knife test

Evolution In Corrugated		language:

Fosber Master Cut-off Knife Evolution Test
Test your safety knowledge!

1. To clear a jam on the knife, the operator should?
a) Emergency stop the machine and then climb into the machine to clear the jam.
b) Lockout the doublebacker and Knife Evolution IES disconnect before entering the machine.
c) Lockout the ZES disconnect before entering the machine.
d) Lockout the IES disconnect before entering the machine.

2. On the Knife Evolution the blue light on the light tree indicates what?
a) Fault
b) Soft Fault
c) Enabled
d) Order change

3. Can the inlet table be opened with the IES disconnect turned off?
a) Yes
b) No

4. Adjust the no-crush wheels on the knife -
a) To maximum pressure.
b) To minimum pressure.
c) To maximum pressure without crushing the board.

5. How often should the wick reservoir be checked?
a) Daily
b) Weekly
c) Monthly
d) Yearly

6. Where is the web jam detector(s) located?
a) Before the machine.
b) Inside the machine.
c) After the machine.
d) No web jam detector(s) on the machine.

7. In normal run situation what determins when the knife is going to cut?
a) A photo eye.
b) The board wheel.
c) The slitter scorer.
d) The doublebacker.

8. Can you change the knife cut length while the corrugator is running?
a) Yes
b) No

Employee Area